Click Here to View This Page on Production Frontend
Click Here to Export Node Content
Click Here to View Printer-Friendly Version (Raw Backend)
Note: front-end display has links to styled print versions.
Content Node ID: 391308
During recent testing of the Silvercrest engine, Safran Aircraft Engines discovered a new issue that might affect entry into service of the Silvercrest-powered Dassault Falcon 5X. Safran executives told AIN at NBAA 2017 that fixing this issue should not affect the timeline of the Silvercrest-powered Cessna Citation Hemisphere.
“We are confident we will fix this by the time the Hemisphere will be at the same stage of development as the 5X,” said Cédric Goubet, executive v-p of Safran’s commercial engines division.
The issue was discovered during airborne testing of a Silvercrest mounted on Safran’s Gulfstream GII flying testbed (FTB) in San Antonio, Texas. The problem didn’t manifest during takeoff or landing or normal operations, but only at high altitude during engine-responsiveness tests, according to Goubet. “The high-pressure (HP) compressor was a bit too slow to accelerate and decelerate,” he explained. “We will fix this, but it will add delays [to the 5X program].”
“[The compressor problem] has really been highlighted in the FTB,” explained Michel Brioude, general manager of the Silvercrest program. More flight testing is planned, as well as testing in a high-altitude test chamber on the ground.
These tests will help Safran engineers refine the best solution, which could include optimizing the HP compressor airflow. The HP compressor is a four-stage axial design with a single centrifugal impeller. The Silvercrest delivers 11,500 to 11,900 pounds of thrust and has a bypass ratio of 5.9:1.
Safran engineers have collected reams of data as a result of the airborne tests. “We have a good understanding of the issue,” said Goubet. “There are a varying range of solutions. We have to design the most efficient solution.”
He added that Safran can’t yet supply a timeline for the fix. The most recent plan was to achieve certification of the Silvercrest in spring 2018, in preparation for 5X entry into service in 2020. The testbed engines have logged more than 800 flights, and the engine on which the problem was discovered had run in the GII FTB for 90 hours, including 30 hours on the ground and 60 hours in the air. The compressor problem was discovered during a test that was pushing the engine to its operational limits. In normal operations, pilots wouldn’t even notice the lack of HP compressor responsiveness, he said.
“This was disappointing to discover,” Goubet told AIN. “[The engine] was doing well, and we were progressing in the right direction.” The Silvercrest, he added, “is a clean-sheet design specifically for business jets, not a derivative engine, with an unprecedented level of performance. We are very confident and committed to come up with a robust solution.”
Safran executives told AIN at the NBAA Convention last month that fixing the issue should not affect the timeline of the Silvercrest-powered Cessna Citation Hemisphere. “We are confident we will fix this by the time the Hemisphere is at the same stage of development as the 5X,” said Cédric Goubet, executive v-p of Safran’s commercial engines division.
The issue was discovered during airborne testing of a Silvercrest mounted on Safran’s Gulfstream II flying testbed (FTB) in San Antonio, Texas. The problem didn’t manifest itself during takeoff or landing or normal operations, but only at high altitude during engine-responsiveness tests, according to Goubet. “The high-pressure [HP] compressor was a bit too slow to accelerate and decelerate,” he explained. “We will fix this, but it will add delays to the 5X program.”
The compressor problem “has really been highlighted in the FTB,” explained Michel Brioude, general manager of the Silvercrest program. More flight-testing is planned, as well as testing in a high-altitude test chamber. These tests will help Safran engineers refine the best solution, which could include improving the HP compressor airflow. The HP compressor is a four-stage axial design with a single centrifugal impeller. The Silvercrest delivers 11,500 to 11,900 pounds of thrust and has a bypass ratio of 5.9:1.
Safran engineers have collected reams of data as a result of the airborne tests. “We have a good understanding of the issue,” said Goubet. “There are various solutions, and we have to design the most efficient one.”
He added that Safran can’t yet supply a timeline for the fix. The most recent plan was to achieve certification of the Silvercrest in the spring of next year, in preparation for the 5X to enter service in 2020. The testbed engines have logged 800 flights, and the engine on which the problem was discovered had run in the GII FTB for 90 hours (30 hours on the ground and 60 hours in the air). The compressor problem was discovered during a test that was pushing the engine to its operational limits. In normal operations, pilots wouldn’t even notice the lack of HP compressor responsiveness, he said.
“This was disappointing to discover,” Goubet told AIN. “The engine was doing well, and we were progressing in the right direction.” He added, “We are confident and committed to come up with a robust solution.”