Story ID: 387belugaXLSing
Airbus's BelugaXL To Fly By Mid-Year
By: Gregory Polek
Caption: Program schedule calls for 1,000 hours of flight testing before entering service in mid-2019
Word Count: 479
Airbus expects to fly the BelugaXL transport for the first time some six months after rolling out the first structurally complete airframe from its assembly line in Toulouse, France, in early January. Plans call for the first two of a fleet of aircraft to participate in the flight test program, scheduled for just under 1,000 hours. The manufacturer expects the first airplane to enter service in mid-2019, when it starts transporting wings between Broughton, UK; Bremen, Germany; and Toulouse, France. After the first airplanes enter service, a new BelugaXL will come on line every year until 2022. Final assembly of the first airframe started in January last year.

Based on an A330-200F airframe, the BelugaXLs will provide 30 percent more transport capacity than the Beluga-600XTs they will replace. For example, each can carry a complete set of A350XWB wings, compared with just one wing for the 600XT. Similarly, it can carry more parts of the A320. In total, the new Beluga can carry 52 metric tons of payload over a distance of 2,200 nautical miles nonstop.

The five existing Beluga-600XTs, which will reach mid-life in 2018/19, will gradually retire from service but will continue to fly alongside the XLs. Their future remains unclear, but Airbus is studying possibilities for service with operators interested in “oversize” transport, it said.

“We have the A330 as a foundation,” said Bertrand George, head of the BelugaXL program. “But many changes have been successfully designed, introduced into the aircraft and tested. Transforming an existing product into a super transporter is not a simple task.”

“The whole team is really looking forward to seeing its first flight and, of course, its smiling livery,” said George, referring to the supersized smile that will be painted across the "face" of the transporter, the winning design of six options presented to Airbus employees for a vote in early 2017.

Before first flight can happen, the aircraft will undergo a months-long battery of tests after installation of its two jet engines, ensuring each of the BelugaXL’s systems functions as intended. “We will perform bench tests in Toulouse and Hamburg, Germany—testing our systems on flight simulators and in laboratories” as well as using hydraulic jacks to simulate flight loads on full-scale copies of specific joints between the new upper bubble and A330’s lower fuselage.

“The data from these tests will be used to clear the aircraft for flight and, later on, to attain type certification,” said George.

While the first structurally complete BelugaXL moves into its testing phase, the second A330 to be converted into a BelugaXL arrived on schedule in Toulouse to begin its integration process. George noted that with lessons learned from the production of the first transporter, Airbus expects assembly of the second will take about two months' less time.