Story ID: 5-Sikosky CH-53K
Sikorsky Rolls Out Heavy-lift CH-53K Helicopter
By: Chad Trautvetter
Caption: The mostly composite helicopter–dubbed the “King Stallion”–will fly by year-end, with operational service expected in 2019.
Word Count: 543
Sikorsky Aircraft rolled out the CH-53K, the U.S. Marine Corps’ future heavy lift helicopter, on May 5 at the company’s West Palm Beach, Fla. facility. According to Sikorsky, the mostly composite helicopter—dubbed the “King Stallion”—will fly by year-end, with operational service expected in 2019.

“The rollout of the CH-53K helicopter introduces a new era in Marine Corps aviation,” said Sikorsky president Mick Maurer. “The clean-sheet CH-53K will effectively triple the external load carrying capacity of the CH-53E aircraft—to more than 27,000 pounds over a mission radius of 110 nautical miles. With its 88,000-pound maximum gross weight, powerful new engines, lightweight composite structure, new rotor blades and fly-by-wire flight controls, the CH-53K will have the means to move troops and equipment from ship to shore, and to higher altitude terrain, more quickly and effectively than ever before.”

Three 7,500-shp GE Aviation T408 engines power the helicopter, offering 57-percent more horsepower and 20-percent lower specific fuel consumption over the CH-53E’s GE T64 turboshaft. To convert the extra engine power into torque and shaft horsepower within a similarly sized main gearbox, Sikorsky developed a new transmission system.

That power is then transferred to the largest and most technologically advanced main rotor blade that Sikorsky has ever produced. Measuring 35 feet in span length and almost three feet in chord width, the all-composite blade has 12 percent more surface area than the CH-53E blade.

Thanks to an airframe built from strong, lightweight composite materials, the CH-53K retains the same external footprint as its predecessor—a required specification for the helicopter to fit on existing U.S. Navy ship elevators—but has a cabin that is 13 inches wider. In the flight deck, a Rockwell Collins digital glass cockpit governs a fly-by-wire flight control system developed by Sikorsky, UTC Aerospace Systems, Eaton and BAE.

According to Sikorsky, the CH-53K is one of the first all-digitally designed helicopters. This approach enabled the company to assemble the aircraft inside a 3-D virtual reality lab at its Stratford, Conn. headquarters before any metal was cut. “Our ‘build before you build’ approach allowed our engineers to work ‘inside’ the helicopter,” said Maurer, “to verify assembly designs and correct issues long before discovery and expensive rework on the assembly line.”

Last month, Sikorsky began powered ground tests of the CH-53K aircraft systems, such as rotors, drive, electrical, hydraulic, avionics and flight controls. Its ground test vehicle 1 (GTV1) will log some 250 hours of powered ground tests before the CH-53K’s first flight later this year, which will kick off a three-year flight test program. GTV1, which is bolted to the ground at a remote testing area within Sikorsky’s West Palm Beach facility, will log a total of 900 hours of tests by the end of 2016, after which the airframe will be shipped to China Lake for live weapons testing.

Currently, the USMC has nine CH-53Ks under contract: four engineering development model flight vehicles, GTV1, a static article, a fatigue article and two recently added system demonstration test articles. The USMC intends to order at least 200 CH-53Ks and set up eight operational squadrons and one training squadron.